by Steven Hespeler  and Donovan Fuqua

Received: 31 July 2020;  Published: 12 January 2021;  doi: 10.21926/jept.2101003

This investigation presents a data-driven Long-short Term Memory battery model for predicting State of Charge for lithium-ion batteries LiFePO4 for next-generation vehicle operations. Our modified algorithm builds and updates a model using multivariate inputs that include physical properties, voltage, current, and ambient temperature during operations. The primary research goal is to improve prediction performance on future values from multiple training examples using an online learning scheme. Initial results demo [...]

by Journal of Energy and Power Technology Editorial Office

Received: 07 January 2021;  Published: 07 January 2021;  doi: 10.21926/jept.2101002

The editors of Journal of Energy and Power Technology would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2020. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers receive a voucher entitling them to a discount on their next LIDSEN publication and can download a certifi [...]

by Deewakar Poudel  , Benjamin Belfore  , Shankar Karki  , Grace Rajan  , Sina Soltanmohammad  , Angus Rockett  and Sylvain Marsillac

Received: 28 October 2020;  Published: 06 January 2021;  doi: 10.21926/jept.2101001

The effect of water ingress on the surface of the buffer layer of a Cu(In, Ga)Se2 (CIGS) solar cell was studied. Such degradation can occur either during the fabrication process, if it involves a chemical bath as is often the case for CdS, or while the modules are in the field and encapsulants degrade. To simulate the impact of this moisture ingress, devices with a structure sodalime glass/Mo/CIGS/CdS were immersed in deionized water. The thin films were then analyzed both pre and post water soaking. Dynamic second [...]

by Wisut Chamsa-ard  , Derek Fawcett  , Chun Che Fung  and Gerrard Poinern

Received: 28 September 2020;  Published: 29 December 2020;  doi: 10.21926/jept.2004018

The demand for high-quality freshwater is increasing due to global population growth, intensifying agricultural practices and expanding industrial development. Additionally, many global regions have low levels of rainfall which makes them arid and incapable of supporting large human populations or agriculture. Currently, large quantities of fossil fuels are used to generate the power needed to drive energy intensive desalination processes that deliver high-quality freshwater to many of these regions. However, the u [...]

by Samuel Cruz-Manzo

Received: 31 July 2020;  Published: 24 November 2020;  doi: 10.21926/jept.2004017

In this study, uncertainties during the assessment of the electrochemical impedance spectrum of the polymer electrolyte fuel cell (PEFC) attributed to inductive artefacts at high frequencies and inductive loops at low frequencies as well as oxygen diffusion time constant are discussed. A validated impedance model represented as an equivalent electrical circuit of a PEFC allowed the simulation of the effect of inductive artefacts, inductive loops and oxygen diffusion time constant on electrochemical impedance spectr [...]

by Katarzyna Grubel  , Ji Su  , Jotheeswari Kothandaraman  , Kriston Brooks  , Gabor A. Somorjai  and Tom Autrey

Received: 01 September 2020;  Published: 23 November 2020;  doi: 10.21926/jept.2004016

In this perspective on hydrogen carriers, we focus on the needs for the development of robust active catalysts for the release of H2 from aqueous formate solutions, which are non-flammable, non-toxic, thermally stable, and readily available at large scales at reasonable cost. Formate salts can be stockpiled in the solid state or dissolved in water for long term storage and transport using existing infrastructure. Furthermore, formate salts are readily regenerated at moderate pressures using the same catalyst as for [...]

by Jacob Ladenburg

Received: 28 April 2020;  Published: 12 August 2020;  doi: 10.21926/jept.2003015

Visual external costs are significant elements in the cost-benefit analysis of wind farm locations. This has been demonstrated well in the literature. However, in the assessment of the visual costs, a large share of the earlier studies used no or only simplistic visualizations of the visual impacts at stake. The cost estimates thus rely on the respondents’ ability to imagine the visual impacts associated with wind turbines of different sizes and at different locations. This has been argued to potentially reduce the [...]

by Mohammad Jafari  and Zahra Malekjamshidi

Received: 13 June 2020;  Published: 05 August 2020;  doi: 10.21926/jept.2003014

In this paper, a topology of a residential hybrid renewable energy system based on a high-frequency multi-winding transformer is introduced and analyzed. The system includes a PV and a wind-turbine as renewable energy sources, a battery as energy storage and their energies are integrated through a high-frequency transformer. In fact, the transformer integrates the energies in a magnetic form and also isolates the system inputs and outputs. The integrated output from renewables and battery is a DC high-voltage and i [...]

by Najmul Hoque  , Wahidul Biswas  , Ilyas Mazhar  and Ian Howard

Received: 29 June 2020;  Published: 31 July 2020;  doi: 10.21926/jept.2003013

Hydrogen is regarded as a potential solution to address future energy demands and environmental protection challenges. This study assesses the triple bottom line (TBL) sustainability performance of hydrogen as an automotive fuel for Western Australia (WA) using a life cycle approach. Hydrogen is considered to be produced through water electrolysis. Two scenarios, current grid electricity and future renewable-based hydrogen, were compared with gasoline as a base case. The results show that locally produced grid elec [...]

by Peter Leary  , Peter Malin  , Graeme Saunders  and Charles Sicking

Received: 03 December 2019;  Published: 29 July 2020;  doi: 10.21926/jept.2003012

A core feature of convective geothermal resource production is wellbore energy flow Q ~ ρC x T x V. E.g., for wellbore fluid of volume heat capacity ρC ~ 4.3MJ/m3∙oC, temperature T ~ 230oC, and volumetric flow V ~ 50L/s, wellbore heat energy production is Q~ 50MWth ~ 5MWe. Wellbore fluid flow V =2πr0φv0ℓ for open wellbore length ℓ is given in turn by the spatially variable product crustal porosity times crustal fluid velocity v ≡ φv0 at the wellbore radius r0. For a geothermal wellbore to be productive (nominal Q ~ [...]