by Dimitris Kouzoudis  , Georgios Samourgkanidis  and Christos I. Tapeinos

Received: 12 December 2020;  Published: 06 April 2021;  doi: 10.21926/rpm.2102010

In the current work, 30 micron thin magnetoelastic ribbons made of metallic glass are embedded inside 6 mm thick PLA plastic cantilever beams made by 3-D printing, in order to detect the beams harmonics during bending excitation. This is possible because the ribbons are of magnetoelastic nature and thus changes in their mechanical state induce a corresponding change in their magnetic state. The ribbons are placed at four different depths, starting with zero depth at the beam’s external surface all the away inside [...]

by Chandra Mouli Vemury  , Marco Corradi  , Feras Abozaid  and Alasdair Charles

Received: 19 August 2019;  Published: 30 March 2021;  doi: 10.21926/rpm.2101009

Shape memory alloys (SMA) are metallic materials with special thermo-mechanical characteristics which could have many structural applications. Within this class of materials, Ni-Ti (Nickel-Titanium) alloys have numerous applications owing to the significant non-linear behaviour they demonstrate. Nitinol, one of the Ni-Ti alloys, has unique properties such as super-elasticity and shape memory effect which makes it suitable for damping vibrations transmitted to structures during high wind and seismic events. Results [...]

by Kohl Jacobson  , Sam Strassler  , Courtney Spalt  , Sara Henry  , Arthur Powers  and Donald W. Radford

Received: 22 December 2020;  Published: 29 March 2021;  doi: 10.21926/rpm.2101008

Continuous fiber reinforced geopolymer matrix composites offer the potential for use in structural applications at temperatures up to 700°C, while enabling the manufacture at temperatures below 100°C. Studies have investigated a variety of fiber reinforcements, including carbon, SiC and Al2O3. While there has been active research into various grades of Al2O3 fibers, SiC is most commonly used for high temperature reinforcement of geopolymers in oxidizing environments. Both families of reinforcement are relatively [...]

by Supriya Rattan  , Derek Fawcett  , M. Tennant  , Joanna Granich  and Gerrard Eddy Jai Poinern

Received: 02 November 2020;  Published: 05 March 2021;  doi: 10.21926/rpm.2101007

To date, many studies have examined the development and use of novel materials, enhancing the performance of existing dental composites and improving methods for restoring tooth structure. In recent years, nanotechnology-based techniques have been used to develop a variety of nanomaterial-based dental products aimed at conservative dentistry applications. These new nanomaterial-based materials offer improved physicochemical and mechanical properties, combined with enhanced aesthetics that makes them superior restor [...]

by Paola Stabile  , Francesco Radica  , Luigi Ranza  , Michael R. Carroll  , Carlo Santulli  and Eleonora Paris

Received: 12 December 2020;  Published: 02 March 2021;  doi: 10.21926/rpm.2101006

In this work, two types of wastes were introduced, namely, glass from municipal waste and Construction and Demolition Waste (CDW). The latter, which was obtained from rubble generated by the seismic events occurred in Central Italy in 2016, was introduced in two configurations, the single-layer and the double-layer of the cement-based Terrazzo tiles. A maximum of 77% of waste introduction was proven to be possible, therefore creating the possibility of obtaining construction products including high quantities of se [...]

by Gérald Lopez

Received: 25 November 2020;  Published: 25 February 2021;  doi: 10.21926/rpm.2101005

Polymers such as polyimides and fluoropolymers are widely used for insulating aeronautic wires. They are exposed to various changing factors such as temperature, pressure, moisture, vibration, chafing, etc. The electrification on the horizon can potentially increase the demand for these systems. Indeed, this impending evolution of technology pushes the boundaries of commonly-employed wires. Downsizing systems and enhancing the performance is an urgent requirement. A new generation of insulating materials capable of [...]

by Seong Soo Choi  , Byung Seong Bae  , Yong Min Lee  , Myoung JIn Park  , Hyun Tae Kim  , Soo Bong Choi  and Kyoung JIn Kim

Received: 22 December 2020;  Published: 05 February 2021;  doi: 10.21926/rpm.2101004

We fabricated various nanoaperture plasmonic platforms for single-molecule detection. We fabricated nanoapertures like nanopores on a pyramid and nanoslits on an Au flat membrane using a Ga ion focused ion beam drilling technique, followed by irradiating with a high energy electron beam, dependent on the electron beam current density to obtain nanoapertures with a few nanometer sizes (circular nanopore, nanoslit pores). We examined their optical characteristics with varying aperture sizes and sample thicknesses. We [...]

by Ahalapitiya H Jayatissa  , Bodhi R Manu  , Adam M Schroeder  and Omer Ahmed

Received: 13 August 2020;  Published: 22 January 2021;  doi: 10.21926/rpm.2101003

The tribological properties of ZnO thin film coated on an aluminium work piece by RF magnetron sputtering were studied as a function of deposition power, substrate coating temperature, heat treatment and rotation speed. The variation in the coefficient of friction of ZnO films produced under various levels of coating parameters and conditions were experimentally determined using a pin-on-disk tribometer. The results showed that with change in deposition conditions and heat treatment, there are significant microstru [...]

by Mohammed Faruqi  , Zachary Scott Dean  , Francisco Aguiniga  and Breanna Bailey

Received: 15 November 2020;  Published: 15 January 2021;  doi: 10.21926/rpm.2101002

Prestressed concrete members have gained popularity as an efficient and effective way of designing a structural member with the best engineering and material properties. The method of prestressing a structural concrete member has the capability of controlling increased service loads with less depth over longer spans. However, deflections from over-loading or loading over time give a disadvantage to the common steel reinforced concrete members by the effect of corrosion as the structural concrete develop cracks. To [...]

by Recent Progress in Materials Editorial Office

Received: 07 January 2021;  Published: 07 January 2021;  doi: 10.21926/rpm.2101001

The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2020. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers receive a voucher entitling them to a discount on their next LIDSEN publication and can download a certificate of re [...]