by John Konstantaras  , Christos Pagkalos  , Maria K. Koukou  , Kostas Lymperis  , Yannis Caouris  and Michail Gr. Vrachopoulos

Received: 17 April 2022;  Published: 09 June 2022;  doi: 10.21926/jept.2202021

In this study, the performance of a self-sufficient controller used for a solar-latent heat domestic hot water (DHW) production unit under real-world operating conditions was analyzed. The unit consists of a flat-plate solar collector and a latent heat storage tank. The controller is powered by a sm [...]

by Koorosh Goudarzi  and Mohammad Reza Zare

Received: 19 April 2022;  Published: 08 June 2022;  doi: 10.21926/jept.2202020

Passenger and commercial internal combustion engines have relatively large dissipated thermal energy sources that can be used for initiating thermodynamic refrigeration cycles at low temperatures while improving engine efficiency. Researchers have focused on combined power-refrigeration cycles in pa [...]

by Mariana P. Koss  and Luiz E. M. Lima

Received: 14 February 2022;  Published: 24 May 2022;  doi: 10.21926/jept.2202019

In gas-liquid flows, droplets that detach from the liquid film lining the internal walls of a pipe and merge with the gas flowing through the pipe follow an annular flow pattern. This work analyzes correlations for estimating the entrainment fraction of such droplets contained in the literature by c [...]

by Jamie A. Chin  and Wilson C. Chin

Received: 12 February 2022;  Published: 23 May 2022;  doi: 10.21926/jept.2202018

Flows in multi-branch piping systems are modeled for linear Newtonian and nonlinear Power Law, Bingham Plastic and Herschel-Bulkley fluids. The nonlinear models are often used to describe multiphase fluids consisting of liquid and solid phases, including cement slurries and drilling muds in petroleu [...]

by Diego Alves de Moro Martins  , João Rodrigo Andrade  , Carlos Antonio Ribeiro Duarte  , Ricardo de Vasconcelos Salvo  and Francisco José de Souza

Received: 31 January 2022;  Published: 06 May 2022;  doi: 10.21926/jept.2202017

Cyclone separators are widely used in fluid catalytic cracking (FCC) units due to their lack of moving parts and relatively low-pressure drop. However, cyclone separators are prone to erosion-related issues, which is a major drawback. In this paper, a large eddy simulation (LES) of the particle-gas [...]

by Udaya Kahangamage  , Yi Chen  , Chun Wah Leung  and Tung Yan Ngai

Received: 02 January 2022;  Published: 18 April 2022;  doi: 10.21926/jept.2202016

The lean-burning limits of hydrogen-enriched Liquefied Petroleum Gas (LPG) have been studied using a Bunsen burner. The lean-burning limits under different conditions are important design considerations in developing gas-fired domestic appliances. In this study, the lean-burning limits of hydrogen-e [...]

by Simon Calles  , Paul Heitjans  and Alexander Börger

Received: 09 November 2021;  Published: 18 April 2022;  doi: 10.21926/jept.2202015

Prismatic PHEV2 form-factor lithium-ion cells with a nominal capacity of 25 Ah (as used for automotive applications) have been studied with electrochemical impedance spectroscopy (EIS). The data was evaluated using electrical equivalent circuits. Mathematical modeling, system identification, and the [...]

by Meenal Jain  , Meenakshi Mital  and Matt Syal

Received: 21 November 2021;  Published: 14 April 2022;  doi: 10.21926/jept.2202014

by Hossein Akbari  , Seyed Mojtaba Hosseinnia  , Mikhail Sorin  , James Christopher Reddick  and Dominic Laperle

Received: 13 January 2022;  Published: 12 April 2022;  doi: 10.21926/jept.2202013

by Lotta Lounasmeri

Received: 26 November 2021;  Published: 06 April 2022;  doi: 10.21926/jept.2202012

This paper examines the building of a new nuclear plant as a greenfield operation in Pyhäjoki, Finland. A newly-founded energy company, Fennovoima, was granted a license by the Finnish parliament to build a new power plant in 2010. In the years following this Decision in Principle the project faced [...]