by Ki-Won Jeong  , Jeong Chan Kim  and In-Sung Yeo

Received: 13 August 2020;  Published: 17 December 2020;  doi: 10.21926/rpm.2004024

by Hassan-Ali Hakemi

Received: 11 October 2020;  Published: 08 December 2020;  doi: 10.21926/rpm.2004023

In this work, the experimental data on flexible PDLC films at the industrial scale and the effect of cure temperature (Tc) on the morphology and electro-optical properties of a UV-cured PDLC system via polymer-induced phase separation (PIPS) method were studied. Under constant UV radiation intebsity [...]

by Maathar Al Qasimi  , Dhafer Manna Al Zulayqa  and Mostafa Seifan

Received: 29 July 2020;  Published: 23 October 2020;  doi: 10.21926/rpm.2004022

Additive manufacturing is a recent revolution in the construction field since cementitious materials became printable. This extrusion technique has enabled the construction of very complex geometry with a reduction in costs, time and labour interventions. This study aims to evaluate the possibility [...]

by Babak Jahani  , Xinnan Wang  and Amanda Brooks

Received: 26 June 2020;  Published: 08 September 2020;  doi: 10.21926/rpm.2003021

Bone tissue engineering (BTE) as a modern and more effective treatment for bone defects has recently received lots of attention. One of the pivotal parts of BTE is the “scaffold”, which functions as an indwelling carrier of cells and additives, as well as, providing a foundation for cell growth and [...]

by Evelyne El Masri  and Tat-Hean Gan

Received: 28 May 2020;  Published: 27 August 2020;  doi: 10.21926/rpm.2003020

Carbon fibre reinforced polymer (CFRP) systems as sheets or plates are commonly used to strengthen and retrofit damaged reinforced concrete beams. In general, the bond between the FRP element and concrete defines the effectiveness of the externally bonded FRP materials. In most cases, the interface [...]

by Kiril Fedorov  , Sonia Sheikh  , Alex Romaschin  and Michael Thompson

Received: 03 May 2020;  Published: 18 August 2020;  doi: 10.21926/rpm.2003019

During a variety of medical procedures such as renal dialysis, bypass surgery, and lung transplantation patient blood is exposed to the surface of a number of polymeric materials such as polycarbonate (PC), poly (vinyl chloride) (PVC) and polysulfone (PS) for a period up to several days. Such exposu [...]

by Emma G. Norris  , Diane Dalecki  and Denise C. Hocking

Received: 22 March 2020;  Published: 21 July 2020;  doi: 10.21926/rpm.2003018

Ultrasound is emerging as a promising tool for both characterizing and fabricating engineered biomaterials. Ultrasound-based technologies offer a diverse toolbox with outstanding capacity for optimization and customization within a variety of therapeutic contexts, including improved extracellular ma [...]

by Razieh Sadraei

Received: 25 April 2020;  Published: 01 July 2020;  doi: 10.21926/rpm.2003017

A literature survey shows that the valorization of urban and/or agricultural biowastes into chemicals has caught the attention of experts and is gradually becoming quite an important issue. This review presents the application of the Bio-Based Substances (BBS) isolated from the compost of bio-wastes [...]

by Vardan Apinyan  and Mane Sahakyan

Received: 17 March 2020;  Published: 01 July 2020;  doi: 10.21926/rpm.2003016

The present report provides a phenomenological theory for monolayer graphene, in which two worlds, the quantum and the classical, meet and complete each other in the most natural manner. In the present report, electron mass-vortex representation is introduced, and the surface tension excitation stat [...]

by C. Aris Chatzidimitriou-Dreismann

Received: 31 March 2020;  Published: 23 June 2020;  doi: 10.21926/rpm.2002015

Current developments of non-relativistic quantum mechanics appear to predict, and reveal, counter-intuitive dynamical effects of hydrogen in nanostructured materials that are of considerable importance for basic research as well as for technological applications. In this review, the experimental foc [...]