by Raisa Barbosa  , Mohamad Issa  , Sidelmo Silva  and Adrian Ilinca

Received: 30 July 2021;  Published: 13 January 2022;  doi: 10.21926/jept.2201003

A substantial share of the electric energy is generated with synchronous generators that provide sustained alternating current (AC) voltage and frequency energy to regional and national power systems, which subsequently transport and distribute it to diverse users. In an attempt to reduce environmental effects, electric energy markets have recently become more open, resulting in more flexible distributed electric power systems. In such distributed systems, stability, quick and efficient delivery, and control of ele [...]

by Shuvajit Ghosh  , Udita Bhattacharjee  , Subhajit Bhowmik  and Dr. Surendra K. Martha

Received: 30 June 2021;  Published: 10 January 2022;  doi: 10.21926/jept.2201002

lithium-ion battery (LIB) is at the forefront of energy research. Over four decades of research and development have led electric mobility to a reality. Numerous materials capable of storing lithium reversibly, either as an anode or as a cathode, are reported on a daily basis. But very few among them, such as LiCoO2, lithium nickel manganese cobalt oxide (Li-NMC) variants (LiNi0.33Mn0.33Co0.33O2, LiNi0.5Mn0.3Co0.2O2, LiNi0.6Mn0.2Co0.2O2, and LiNi0.8Mn0.1Co0.1O2), LiNi0.8Co0.15Al0.05O2, LiFePO4, graphite, and Li4Ti5 [...]

by Journal of Energy and Power Technology Editorial Office

Received: 05 January 2022;  Published: 06 January 2022;  doi: 10.21926/jept.2201001

The editors of Journal of Energy and Power Technology would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2021. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers receive a voucher entitling them to a discount on their next LIDSEN publication and can download a certifi [...]

by Tran X Phuoc  and Mehrdad Massoudi

Received: 28 October 2021;  Published: 22 December 2021;  doi: 10.21926/jept.2104050

To store CO2 in geological reservoirs, expansion valves have been used to intentionally release supercritical CO2 from high-pressure containers at a source point to lower-pressure pipelines and transport to a selected injection site. Using expansion valves, however, has some shortcomings: (i) the fluid potential, in the form of kinetic energy and pressure which can produce mechanical work or electricity, is wasted, and (ii) due to the Joule-Thomson cooling effect, the reduction in the temperature of the released CO [...]

by Abdul G. Khan

Received: 22 July 2021;  Published: 14 December 2021;  doi: 10.21926/jept.2104049

There is growing concern for the contamination of our soils and waters worldwide with heavy metals (HMs), as a result of indiscriminate use of agrochemicals for feeding growing population which require optimal use of resources and sustainable agricultural strategies. This can be simultaneously achieved by using microbes as bio-fertilizers, bio-protectants, and bio-stimulants, and suitable phytoremediation- plant capable of removing heavy metals contaminants from contaminated sites. There is a growing need to adopt [...]

by Abdullah Abbas Kendoush

Received: 04 October 2021;  Published: 07 December 2021;  doi: 10.21926/jept.2104048

By the adoption of a drag-buoyancy equality model, analytical solutions were obtained for the drag coefficients (CD) of Taylor bubbles rising steadily in pipes. The obtained solutions were functions of the geometry of the Taylor bubble and the gas volume fraction. The solutions were applicable at a wide range of Capillary numbers. The solution was validated by comparison with experimental data of other investigators. All derived drag formulas were subject to the condition that Bond number >4, for air-water systems.

by Despina Vamvuka  , Maria Deli  and Antonios Stratakis

Received: 06 September 2021;  Published: 11 November 2021;  doi: 10.21926/jept.2104047

In this work, the conducted chemical, mineralogical, fusibility, and thermogravimetric analyses and calculated the slagging/fouling indicators for predicting deposition tendencies in boilers to study the ash fusibility behavior of selected agricultural residues and their blends with lignite. Two additives, bauxite, and clinochlore, were used at varying amounts to reduce ash melting, followed by examining their anti-fusion mechanisms. Initial deformation and softening temperatures of biomass materials were low for c [...]

by Foad Haeri  , Deepak Tapriyal  , Christopher Matranga  , Dustin Crandall  and Angela Goodman

Received: 05 September 2021;  Published: 05 November 2021;  doi: 10.21926/jept.2104046

Contact angles were measured for CO2-brine interactions on 20 different rocks that represent the properties of various CO2 storage depositional environments to characterize the wettability during geologic carbon storage. Three different CO2 phases (gaseous, liquid, and supercritical) were considered to investigate the effect of pressure and temperature. Bubbles were studied in two groups of larger and smaller than 500 μm, the latter being more relevant to pore scale. Variation was observed among contact angle measu [...]

by Ernest Ilisca

Received: 18 June 2021;  Published: 29 October 2021;  doi: 10.21926/jept.2104045

Most of the hydrogen storage vessels meant for vehicles to run the electric motor via a fuel cell during transport are designed for drives of only a few tenths of kilometers per day. The present report, however, describes a vessel model that is conceived to hold the hydrogen energy only for short periods during transport, such as a few hours. This would include transport via a light-duty vehicle, a taxi, or a bus, which would load liquid hydrogen at a station every morning for the day. This is a simple model based [...]

by Carsten Croonenbroeck  and David Hennecke

Received: 20 July 2021;  Published: 25 October 2021;  doi: 10.21926/jept.2104044

In this study, we address the wind farm layout optimization (WFLO) problem and tackle the issue of optimal turbine placement by incorporating additional aspects of an economically driven target function. Firstly, we have analyzed the effect of wind direction on a given turbine arrangement. Based on the direction-dependent wake pattern, practitioners sometimes shut down certain turbines on their farms. Our method computes which turbines should be shut down in which wake situation. On this basis, we have developed a [...]