by Mariana P. Koss  and Luiz E. M. Lima

Received: 14 February 2022;  Published: 24 May 2022;  doi: 10.21926/jept.2202019

In gas-liquid flows, droplets that detach from the liquid film lining the internal walls of a pipe and merge with the gas flowing through the pipe follow an annular flow pattern. This work analyzes correlations for estimating the entrainment fraction of such droplets contained in the literature by comparing their predictions with experimental data also from the literature. The results of this comparative study demonstrate that the analyzed correlations do not accurately reproduce experimental conditions. This is du [...]

by Jamie A. Chin  and Wilson C. Chin

Received: 12 February 2022;  Published: 23 May 2022;  doi: 10.21926/jept.2202018

Flows in multi-branch piping systems are modeled for linear Newtonian and nonlinear Power Law, Bingham Plastic and Herschel-Bulkley fluids. The nonlinear models are often used to describe multiphase fluids consisting of liquid and solid phases, including cement slurries and drilling muds in petroleum engineering. Rheological and heterogeneous multiphase effects are important to blood flows in single and bifurcated arteries, capillaries and veins – biological applications are also emphasized to highlight their incre [...]

by Diego Alves de Moro Martins  , João Rodrigo Andrade  , Carlos Antonio Ribeiro Duarte  , Ricardo de Vasconcelos Salvo  and Francisco José de Souza

Received: 31 January 2022;  Published: 06 May 2022;  doi: 10.21926/jept.2202017

Cyclone separators are widely used in fluid catalytic cracking (FCC) units due to their lack of moving parts and relatively low-pressure drop. However, cyclone separators are prone to erosion-related issues, which is a major drawback. In this paper, a large eddy simulation (LES) of the particle-gas flow in a cyclone separator is investigated using a four-way Euler-Lagrange approach to model inter-particle collisions and the exchange of momentum between particles and fluid. The effects of inter-particle and particle [...]

by Udaya Kahangamage  , Yi Chen  , Chun Wah Leung  and Tung Yan Ngai

Received: 02 January 2022;  Published: 18 April 2022;  doi: 10.21926/jept.2202016

The lean-burning limits of hydrogen-enriched Liquefied Petroleum Gas (LPG) have been studied using a Bunsen burner. The lean-burning limits under different conditions are important design considerations in developing gas-fired domestic appliances. In this study, the lean-burning limits of hydrogen-enriched LPG have been obtained across a wide range of Reynolds numbers (600 to 1800) and H2 volumetric fractions (0% to 25%). The results show that the lean-burning limit is increased, on average, by 4.0% to 7.2% for eve [...]

by Simon Calles  , Paul Heitjans  and Alexander Börger

Received: 09 November 2021;  Published: 18 April 2022;  doi: 10.21926/jept.2202015

Prismatic PHEV2 form-factor lithium-ion cells with a nominal capacity of 25 Ah (as used for automotive applications) have been studied with electrochemical impedance spectroscopy (EIS). The data was evaluated using electrical equivalent circuits. Mathematical modeling, system identification, and the determination of model parameters of the lithium-ion cell were also carried out. While a study of the influence of temperature and state-of-charge (SOC) performed using pristine lithium-ion cells showed a nonlinear rela [...]

by Meenal Jain  , Meenakshi Mital  and Matt Syal

Received: 21 November 2021;  Published: 14 April 2022;  doi: 10.21926/jept.2202014

India is a rapidly developing nation and is heavily dependent on fossil fuels. Renewable energy presents an attractive solution to the growing challenges concerning energy needs. Solar energy is abundant in India, and thus, its application and use are rapidly advancing. This study assesses various government initiatives for off-grid Solar Photovoltaic/Solar Water Heating systems for commercial establishments in India and elucidates the need for improvements in their implementation, highlighting the problems in avai [...]

by Hossein Akbari  , Seyed Mojtaba Hosseinnia  , Mikhail Sorin  , James Christopher Reddick  and Dominic Laperle

Received: 13 January 2022;  Published: 12 April 2022;  doi: 10.21926/jept.2202013

Heat integration techniques such as pinch analysis can play a significant role in saving energy in the design of buildings. The application of pinch analysis in this sector encounters difficulties due to the highly time-dependent behavior of energy streams such as waste heat and solar thermal collectors, as well as the possible need for heat storage units (HSUs). The existing pinch models in the literature either bear little relation to reality because they ignore the time dependency of the streams, or they do not [...]

by Lotta Lounasmeri

Received: 26 November 2021;  Published: 06 April 2022;  doi: 10.21926/jept.2202012

This paper examines the building of a new nuclear plant as a greenfield operation in Pyhäjoki, Finland. A newly-founded energy company, Fennovoima, was granted a license by the Finnish parliament to build a new power plant in 2010. In the years following this Decision in Principle the project faced several obstacles. Through interviews with key actors, this paper identifies the interests and core beliefs associated with building the plant. It posits that, in Finland, the underlying ideas and values surrounding nucl [...]

by Arnold Hendharto Widdhiarta  , Yousuke Shimaura  , Ichiro Nagai  , Takayuki Shibata  and Yutaka Moritomo

Received: 15 February 2022;  Published: 30 March 2022;  doi: 10.21926/jept.2201011

We fabricated three thermo-rechargeable batteries using low-cost transition metal hexacyanoferrate and determined the thermal voltage (Vcell) and discharge capacity (Qcell) per unit weight of the total active material in the cathode and anode. The obtained values were compared with the calculated values, which were determined by analyzing the temperature and capacity coefficients of the redox potential.

by Zhen Liu  , Li Yang  , Abhishek Lahiri  , James F Rohan  and Frank Endres

Received: 26 December 2021;  Published: 27 March 2022;  doi: 10.21926/jept.2201010

Herein, we report the coating of nanostructured germanium using a polypyrrole (PPy) polymer coat as a composite anode material for the fabrication of lithium-ion batteries. The Ge/PPy composites were synthesized following the direct electrochemical deposition method in an ionic liquid (IL). The results revealed that the coating of PPy on Ge helped realize stable battery cycling and reversible capacities, which were not observed in uncoated Ge. The PPy layers could effectively inhibit side reactions between the elec [...]